PS 300R
Available in either lightweight (LWT) or touring versions, the PS300R combines legendary classic styling with an exhilarating modern driving experience.
Based on the 90s 964 series, the PS 300R is a high performance modern sports car featuring coil spring suspension with cast aluminium wishbones all round, power steering and ABS brakes.
With a bespoke lightweight interior clad in leather, full harness seat belts, body hugging sports seats, a 3 spoke leather sports steering wheel and traditionally styled PS dials, the 300R feels special even before you have turned the key.
An aluminium bonnet, aluminium mirrors, thinner rear screen, LWT bumpers, boot lid and interior all keep the vital kerb weight down.
For the individual who needs the 300R to be a little more practical, a touring version is available with fully trimmed interior and rear seats for children.
The 3.8 RS spec lightened and balanced engine provides just over 300 BHP with tidal wave torque and performance. A lightweight RS clutch and flywheel are fitted for enhanced lightning gear changes, uprated suspension ensures fantastic road holding and powerful RS specification brakes provide truly epic stopping power.
Interior Exterior Colour - Finished in any colour specified. Performance *estimates for 305BHP version |
PS 300R Technical Specification
Engine
Number of cylinders: 6
Cubic capacity: 3800cc
Maximum power: 300BHP @ 6200RPM
with sport exhaust/performance chip: 305BHP @ 6200RPM
Maximum torque: 262 lb/ft - 350Nm @ 4900RPM
Dry sump lubrication system
Air cooled with fan, enhanced with two thermostatically controlled oil coolers with 2 stage electric fan
Motronic fuel injection
Transmission
Type G50/03 Getrag 5 speed
Ratios: 1st 3.500, 2nd 2.059, 3rd 1.407, 4th 1.086, 5th 0.868 R 2.857
Clutch: Single disc dry clutch with thrust plate, sport type flywheel
Limited Slip Differential (optional)
Brake System
Hydraulic dual circuit braking system with front/rear axle circuit division and vacuum brake booster with ABS. Ventilated and cross drilled discs (322mm front 288 rear) with four pot callipers.
Wheels and Tyres
PS classic style, 3 piece split rim with solid billet centres and alloy rims:
Front: 7.5J x 17 with 205/50 ZR 17 tyre
Rear: 9J x 17 with 225/40 ZR 17 tyre
Suspension
Front: Independent Macpherson struts, lower wishbones combined coil springs and Bilstein dampers, anti roll bar.
Rear: Independent semi trailing arms combined coil springs and Bilstein dampers with roll bar.
Steering
Rack and pinion power assisted.
Body
Galvanised steel with aluminium bonnet, GRP front and rear bumpers, GRP engine cover, 3mm LWT rear screen.
Dimensions
Length: 4200mm Width: 1652mm Wheelbase: 2272mm Weight: 1220kg